CISCO WAP121-E-K9 Access Point

৳ 7,000.00

Single Band AP/PoE


CISCO WAP121-E-K9 Access Point Price in Bangladesh

Access Point  Specification :

 Minimum Requirements 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
Switch/router with PoE support or PoE injector when used with PoE
Web-based configuration: Java-enabled web browser
Standards IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Ports LAN Fast Ethernet auto sensing, DC jack
Switch Power button (on/off)
Button Power (on/off) push button, Reset button
Cabling Type Category 5e or better
Antenna Internal antennas optimized for wall, ceiling, or desktop placement
Operating System Linux
Physical Interface
Ports 10BASE-T/100BASE-TX Ethernet, 12 VDC power with support for 802.3af PoE
Power Supply External 12 V 0.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
Button Power (on/off) push button; Reset button
Lock Slot for Kensington lock
LED Power, Wireless, Ethernet
PoE 802.3af
Peak Power 6 W
Supports VLAN, 802.1X supplicant, SSID to VLAN mapping, Auto channel selection, Spanning tree, Load balancing
Number of VLANs 1 management VLAN plus 4 VLANs for Service Set ID (SSID)
Multiple SSIDs 4
IPv6 IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc
Layer 2 Features 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN
Encryption WPA/WPA2/WEP & Enterprise authentication
Access Control Management access control list (ACL) plus MAC ACL
Secure Management HTTPS
Wi-Fi Protected Setup Soft WPS, no hardware push button
Broadcast System SSID
Detection Functions Rogue access point
Mounting Options
Options Desktop installation; mounting bracket included for easy ceiling or wall mounting
Lock Kensington lock slot
Quality of Service (QoS)
QoS Wi-Fi Multimedia & Traffic Specification (WMM TSPEC)
Data Rate Up to 300 Mbps data rate (real-world throughput will vary)
User support Recommended up to 16 connected users, or 10 active users.
Web User Interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Setup Single Point
Access Point Management Maximum per cluster: 4
Active clients per cluster: 40
Management & Protocols
Management Protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Event Logging Event logging
Network Diagnostics Logging and packet capture
Web firmware upgrade Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP) DHCP client
Host IPv6
Frequency Single-band 2.4 GHz
Radio Type Single radio
Modulation Type OFDM (Orthogonal Frequency Division Multiplexing)
Channels 1 to 13 (depending on country)
Channels 1 through 11 (FCC)
Channels 1 through 13 (ETSI)
Isolation Wireless isolation between clients
Internal Antennas Internal fixed PIFA antennas
Antenna Gain In dBi 2 dBi each antenna
Transmitted Power 802.11b @ 11 Mbps: 17 dBm
802.11g @ 54 Mbps: 13 dBm
802.11n @ HT20HT40, MCS15: 13 dBm
Receiver Sensitivity 802.11b: 11 Mbps @ -86 dBm
802.11g: 54 Mbps @ -71 dBm
802.11n: 300 Mbps @ -64 dBm
Multiple SSIDs 4
Supports Wireless Distribution System (WDS), Roaming, Wireless VLAN map, WLAN security
WMM With unscheduled automatic power save and voice profile
Access Point Modes Access Point mode, WDS bridging, Workgroup Bridge mode
Power 12 VDC, 0.5 A input, and IEEE802.3af compliant PoE
Certifications FCC class B, CE, IC, Wi-Fi
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature -4 to 158°F (-20 to 70°C)
Operating Humidity 10 to 85% non-condensing
Storage Humidity 5 to 90% non-condensing
Mean Time Between Failures 531189 hours
Dimensions (W x D x H) 4.89 x 4.89 x 1.38″ (124.17 x 124.17 x 35.00 mm)
Weight 0.37 lb (0.16 kg)
Packaging Info
Package Weight 1.3 lb
Box Dimensions (LxWxH) 9.7 x 5.8 x 3.2″

CISCO WAP121-E-K9 Access Point Price in Bangladesh