Specification GP3600-08
System Capacity Maximum coupling ratio:1:128

Backplane bandwidth:205G

MAC table capacity: 64K

Interface PON 8
Uplink interface 4 gigabit SFP slots, 4 gigabit TX/SFP combo ports
4 10G SFP+ slots
Attributes of the PON Interface The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps

Class B+ and Class C+ GPON module

Security: ONU authentication mechanism

Standards ITU-T G.984/G.988

IEEE 802.1D, Spanning Tree


IEEE 802.1w, RSTP

IEEE 802.3ad physical link static/dynamic aggregation (LACP)

Ethernet – II

QoS Backpressure flow control (half duplex)

IEEE 802.3x flow control (full duplex)

IEEE 802.1p, CoS

WRR, SP and FIFO queue schedule

Limiting the uplink/downlink rate based on each ONU


VLAN Port-based VLAN

QinQ and flexible QinQ

Multicast L2 multicast

IGMP Snooping

MLD Snooping

Layer-3 routing functions Static routing, RIP and OSFP,OSFP/OSPFv3
Reliability Unidirectional Link Detection (UDLD)

Hot swap of the GPON optical module

Optical path protection of GPON (type B/C, hand-in-hand)

Abnormal luminescence ONU detection such as long luminescence

Network Security Limiting the maximum number of users on each port

Port isolation

Packet storm control

Flow-based ACL access control function

Transmission data encryption on the PON interface

Configuration Management Various management modes such as CLI, SNMP and telnet

Conducting software upgrade through TFTP/FTP

Debug output

Physical Characteristics Dimensions mm (W×D×H): 442.5x304x 44
Installation: standard 19-inch rack-mount
Environment Operating environment: 0℃-45℃; 10%-85% non-condensation
Storage environment: -40℃-80℃; 5%-95% non-condensation
Power supply Input voltage: AC90~240V, DC 36 ~ 72V

dual-power input, DC/AC power supply and hot-swap



There are no reviews yet.

Be the first to review “BDCOM GPON GP3600 8 PORT OLT”

Your email address will not be published. Required fields are marked *

Vendor Information